5
• Operating mode selector :
:
off position
: cold ventilation position
: 1000W
: 2000W
• Indicator light C : the indicator light is lit when the appliance is operated using button A.
• Thermostat : adjust the temperature according to your own comfort : button B
• Cool Fan Setting : This setting enables you to use your fan heater as a cooling fan in summer.
• 1000W setting : Minimum Power setting 1000W ; regulated by the thermostat.
• 2000W setting : Maximum Power setting 2000W ; regulated by the thermostat.
• Frost-free setting : this setting enables you to automatically maintain the temperature above 0°C
in a normally insulated room, whose volume corresponds to the power of your appliance.
Important : When using the appliance for the first time, it may temporarily release a mild odour and
smoke (this is normal with all new appliances: it will disappear after a few minutes).
MAINTENANCE AND STORAGE
• You can clean your appliance with a slightly damp cloth.
• IMPORTANT: never use abrasive products which could damage the surface of the appliance.
• Clean the air intake and outlet screens regularly.
• Store your appliance in a dry environment when not in use.
TROUBLESHOOTING
Never dismantle the appliance yourself. A poorly repaired appliance may be dangerous for the user.
Do not use your appliance and contact an approved service centre if:
• Your appliance has fallen to one side;
• Your appliance or its power cable is damaged;
• Your appliance is not functioning properly.
You can find a list of approved service centres in the Rowenta International Guarantee leaflet
included with your product.
HELP PROTECT THE ENVIRONMENT!
Your appliance contains a lot of materials which can be recovered or recycled.
Take it to a collection point or an approved service centre for processing.
These instructions are also available on our internet site: www.rowenta.com
FR
DESCRIPTION
Lisez attentivement le mode d’emploi ainsi que les consignes de sécurité avant toute utilisation
et conservez ce mode d’emploi.
CONSEILS DE SECURITE
ATTENTION :
Avant chaque utilisation, vérifiez le bon état général de
A. Bouton de sélection des fonctions
B. Bouton de réglage de température : Thermostat
C. Voyant mise sous tension
D. Grille d’entrée d’air
E. Grille de sortie d’air
F. Poignée de transport
G. Cordon d'alimentation
EN
To Next Page
Loading...
Need help?
General
