Why does my Rowkin ASCENT CHARGE Headphone sound break up or fade?
Your Rowkin Headphone sound may break up or fade because the headset is too far from the source device, there is interference between the headset and the source device, or the human body is interfering and weakening the signal. To resolve this, keep the source device close and in direct view of the headset, and avoid covering it with your hands or arms.
What to do if the other party on the call can't hear my voice on Rowkin Headphone?
If the other party on the call can't hear your voice when using your Rowkin Headphone, it may be due to a noisy environment or something covering the headset, like hair or hands. Remove anything covering the headset, speak louder, and try calling from a quieter environment.
What to do if my Rowkin ASCENT CHARGE doesn’t power on when removed from the case?
If your Rowkin Headphone doesn’t power on when removed from the case, the earbuds may not have been connected firmly in the case while charging. Make sure the earbud indicator is flashing while in the case to confirm charging. You can also manually power on the earbuds by pressing the button for 3 seconds.
Step-by-step guide for initial earbud synchronization and device pairing.
Step-by-step instructions for performing a factory reset on the earbuds.
Addresses common problems with earbuds and provides potential solutions.
Lists detailed technical data, dimensions, battery, and performance specifications.
Guidelines for safe operation, listening practices, and environmental awareness.
General| Type | True Wireless Earbuds |
|---|---|
| Charging Case | Yes |
| Bluetooth Version | Bluetooth 5.0 |
| Water Resistance | IPX5 |
| Microphone | Yes |
| Driver Size | 6mm |
| Charging Time | 1.5 hours (earbuds), 2 hours (charging case) |
| Wireless Charging | Yes |
| Frequency Response | 20Hz - 20kHz |
| Wireless Range | Up to 10 meters |
To Next Page