Rowlinson Modena Arbour User Manual

Assembly Instructions
Modena Arbour English SS412
Before assembly
• We recommend that time is taken to read
the instructions before starting assembly,
then follow the easy step by step guide.
The instruction sheet is only a guide to
the assembly. Certain items may not be
shown to scale.
• Check all components prior to assembly
• This product should be assembled by no
less than two people
• Drill all components where indicated
x 2
Drill
Recommended tools for assembly
• Power drill/screwdriver
• 3mm drill bit
• Crosshead screwdriver bit
No. Fixing Kit Qty.
12 Wooden dowels 2
13 60mm screws 14
14 50mm screws 8
15 40mm screws 84
16 35mm screws 6
No. Components Qty.
1 Right-hand upright 1
2 Left-hand upright 1
3 Seat 1
4 Seat back 1
5 Back panel 1
6 Back right/front left rafter 2
7 Front right/back left rafter 2
8 Centre roof slat 1
9 Roof slat sections 2
10 Small finial 4
11 Large finial 2
1
5
2
3
4
6
7
8
9
10
11

Rowlinson Modena Arbour Specifications

General

Type	Arbour
Material	Pressure treated timber
Style	Contemporary
Assembly Required	Yes
Warranty	1 Year

Summary

Modena Arbour Assembly Guide

Recommended Tools for Modena Arbour Assembly

Lists necessary tools like power drills and screwdriver bits for building the arbour.

Seat to Uprights Assembly

Connects the seat to the main upright supports using screws, ensuring correct positioning.

Seat Back to Uprights Assembly

Attaches the seat back to the uprights and seat frame using screws for structural support.

Back Panel Installation

Slides the back panel into the upright rebates and secures it with screws.

Roof Rafter Assembly

Joins roof rafters together using dowels and screws, creating the arbour's curved roof structure.

Rafters to Uprights Attachment

Secures the assembled roof rafters to the main uprights using screws and attaches finials.

Roof Slats Installation

Attaches the centre roof slat and side roof slats to the rafters for a complete roof.

Important Information and Contact