Roxcore Blaster One - Advanced Features and Troubleshooting; Call Handling and Volume Adjustment; Wired Connection and Troubleshooting

4
ENGLISH
Handling calls (only if connected via Bluetooth)
Answer call: Press the handsfree button (3) once.
End call: Press the handsfree button (3) once. Bluetooth music will resume.
Decline call: Press and hold the handsfree button (3).
Redial last called number: Press and hold the handsfree button (3) for 3 seconds.
Connect via cable
Connect an audio cable to the AUX in (7) port and your device’s port. The LED will shine green.
The speaker will automatically disconnect any currently connected bluetooth devices. You can manually
activate the AUX mode by pressing the power button (1) once to switch the current audio mode.
Volume
Turn the volume wheel clockwise to raise the volume (8). Turn the volume wheel counter-clockwise to
lower the volume (9). The speaker will emit a beep when it reaches maximum volume.
Troubleshooting
If there is no volume (or low), try to raise the volume on your device and the volume on the speaker.
Bad sound quality or no sound at all. For Bluetooth connection, check that the correct device is
connected and not too far away. For cable connection, check that the cable is plugged all the way in at
both ends and that the cable is not faulty.
Safety information
The speaker contains a rechargeable Li-ion battery and the battery can not be replaced.