How to fix Royal Catering RCBM-40N Brewing Systems if the temperature does not reach 100°C?
If the Royal Catering Brewing Systems temperature does not reach 100°C, cover it with a lid for 1 – 2 minutes. If the problem persists, adjust the temperature settings.
What does ERR-1 mean on Royal Catering RCBM-40N?
If 'ERR-1' appears on the Royal Catering Brewing Systems display, this is a low temperature warning because the temperature is below – 20°C. Also, open the bottom and check the sensor connection. If it is not connected, then re-connect it.
How to unclog Royal Catering RCBM-40N pump?
If ingredients clog up in the Royal Catering Brewing Systems pump, flush the pump by connecting the tube to the curved hose. If that doesn't work, dismantle the pump to remove the blockage.
Contains crucial safety instructions and warnings for device operation.
Defines the intended use of the device for brewing mash.
Provides essential guidance and steps for operating the device.
Lists key technical specifications like voltage, power, and temperature range.
Details various programming modes like TIMING, MASHING, BOILING, and HOP.
Instructions for operating the device manually.
Configuration settings for the automatic operation mode.
How to save and recall programmed settings in auto mode.
Steps for selecting and editing pre-programmed recipes.
A detailed sample guide for the brewing process.
Instructions on how to operate and use the circulation pump.
Procedures for cleaning and maintaining the device.
Information on environmental protection and proper disposal of the device.
Company contact details and address for support.
General| Material | Stainless Steel |
|---|---|
| Capacity | 40 Liters |
| Power | 3000 W |
| Voltage | 230 V |
| Frequency | 50 Hz |
To Next Page