Why does my Royal Enfield Classic 350 2020 Motorcycle engine start but shut off immediately?
If your Royal Enfield Motorcycle engine starts but shuts off immediately, it could be due to the idling RPM being set too low or the setting being disturbed. Contact Authorised Service Center for resetting the Idling RPM.
General| Displacement | 346 cc |
|---|---|
| Max Power | 19.1 bhp @ 5250 rpm |
| Max Torque | 28 Nm @ 4000 rpm |
| Fuel System | Electronic Fuel Injection |
| Front Suspension | Telescopic, 35 mm Forks, 130 mm Travel |
| Fuel Tank Capacity | 13.5 liters |
| Kerb Weight | 195 kg |
| Length | 2160 mm |
| Width | 790 mm |
| Height | 1090 mm |
| Ground Clearance | 135 mm |
| Seat Height | 800 mm |
| Wheelbase | 1390 mm |
| Tyre Size (Front) | 90/90 - 19 |
| Tyre Size (Rear) | 110/80 - 18 |
| Engine Type | Single Cylinder, 4 Stroke, Air Cooled |
| Front Brake | 280mm Disc |
| Rear Suspension | Twin shock absorbers |
Specific disclaimers for matt finish motorcycles regarding maintenance and warranty.
Details of the motorcycle's chassis, suspension, brakes, and electrical system components.
Key physical dimensions and weight specifications of the motorcycle.
Identifies switches, levers, and meters on the handlebar assembly.
Locates rear components such as lights, shock absorbers, and silencer.
Identifies left-side components like fuel tank, seats, stands, and ABS module.
Instructions for operating the steering lock, ignition switch, and fuel tank cap.
Details on using the engine stop switch and electric start switch.
Operation of horn, dimmer switch, and turn signal switches.
Recommendations for riding apparel, protective gear, and correct riding posture.
Guidance on effective and safe braking practices.
Explanation of the low fuel warning light and its implications.
Description of the Malfunctioning Indicator Lamp (MIL) for EFI system status.
Details on ABS function, benefits, and indicator lamp behavior.
Step-by-step instructions for starting the engine using both kick and electric start methods.
Instructions and precautions for parking the motorcycle on center and side stands.
Schedule outlining required inspections, adjustments, and replacements at specified intervals.
Step-by-step guide for removing and refitting the front wheel.
Step-by-step guide for removing and refitting the rear wheel.
Tips for lubricating cables, checking oil levels, and maintaining the drive chain.
Guidance on battery maintenance and electrical component checks.
Instructions for checking brake pad wear and replacing bulbs.
Important precautions to follow before, during, and after washing the motorcycle.
Steps to take after washing, including drying and lubrication.
Basic checks and remedies for problems related to engine starting.
Troubleshooting engine performance, misfires, and ABS warning lamp issues.
Details on warranty period, coverage, and claim procedures.
Components and conditions not covered under the motorcycle warranty.
Applicability of warranty for emission control systems and customer obligations.
Conditions under which the emission warranty is applicable or void.
Warranty details for the evaporative emission control system and uncovered items.
Guidance on responsible disposal of vehicle parts and eco-friendly washing practices.
A log section for recording service history, dates, and mileage.
To Next Page