How to fix ROYAL SAUNAS WF9100 if the power indicator light is not on?
If the power indicator light on your ROYAL SAUNAS Plumbing Product isn't on, first, make sure the power cord is securely plugged into the outlet and the main control unit. If it still doesn't work, check the fuse and replace it if it's burned out.
Why is my ROYAL SAUNAS Plumbing Product sauna room not maintaining the correct temperature?
If your ROYAL SAUNAS Plumbing Product sauna room isn't maintaining the correct temperature, the heater may have a problem (see Item #3). Also, the control panel settings might be incorrect, so try resetting it. Finally, the temperature sensor wire could be loose or broken; check its connection and condition, and make sure the sensor head is visible inside the sauna room.
What to do if the infrared heater on my ROYAL SAUNAS WF9100 Plumbing Product will not heat up?
If the infrared heater in your ROYAL SAUNAS Plumbing Product isn't heating up, it could be due to several reasons. The heater itself might be broken and need replacement with a new one of the same specifications. The fuse could be burned out, requiring a check and possible replacement. The wiring connection for the heater might be loose or incorrectly placed, so inspect and reconnect it tightly. Lastly, the circuit board might not be functioning, so check its power output.
How to troubleshoot ROYAL SAUNAS WF9100 light that is not working?
If your ROYAL SAUNAS Plumbing Product light isn't working, start by replacing the light bulb, as it may be burned out. Ensure the bulb is tightly secured in the base to make good contact. Check the lighting protection fuse. If those steps don't work, the socket might be broken and need replacing, or there may be problems with the electrical control panel, which would need to be checked or replaced.
General| Product Type | Infrared Sauna |
|---|---|
| Wood Type | Canadian Hemlock |
| Heater Type | Carbon Fiber |
| Voltage | 120V |
| Control Type | Digital |
| Material | Wood |
To Next Page
