What to do if my Royal Sovereign RTHD-431SS Dryer does not start?
If your Royal Sovereign Dryer isn't starting, first, check the power supply to the unit and make sure the ON/OFF switch is properly set. If the power supply is fine, the issue might be a defective sensor, which would require replacing the IR sensor. Another possible cause is a defective motor.
Why Royal Sovereign Dryer will not shut off?
If your Royal Sovereign Dryer won't shut off, it's likely due to a dirty sensor or a reflection interfering with the sensor. Try cleaning the IR sensor. Also, make sure there are no objects causing a reflection that could be activating the sensor.
Why is my Royal Sovereign RTHD-431SS so loud?
Your Royal Sovereign Dryer might be loud because it is set to HI motor setting. While this setting dries hands faster, it also increases the noise level (decibels). To reduce the noise, switch the motor setting to LOW. Keep in mind that drying hands will take longer on the LOW setting.
How to fix Royal Sovereign RTHD-431SS that is not warm?
If your Royal Sovereign Dryer is not producing warm air, check if the Heat option is turned OFF. If so, set it to the ON position.
What to do if Royal Sovereign RTHD-431SS Dryer air output is slow?
If the air output of your Royal Sovereign Dryer is slow, the motor setting might be set to LOW. Change the setting to HI to increase the air output.
General| Brand | Royal Sovereign |
|---|---|
| Model | RTHD-431SS |
| Type | Hand Dryer |
| Material | Stainless Steel |
| Voltage | 120V |
| Mounting | Wall Mount |
| Activation | Automatic |
To Next Page