To Next PageTo Next Page
Need help?Do you have a question about the Royal REALE and is the answer not in the manual?
General| Brand | Royal |
|---|---|
| Model | REALE |
| Category | Coffee Maker |
| Language | English |
Ensure correct electrical connection, plug suitability, and presence of safety devices.
Guidelines for user restrictions, wet conditions, immersion, and moving the appliance.
Instructions for emergencies, troubleshooting, and cord replacement by authorized service.
Consequences of non-compliance with warnings and improper installation.
Specifies the appliance's intended use and limits manufacturer liability for misuse.
Outlines the manual's purpose, company support, and product quality assurances.
Procedures for unpacking, placing, and connecting the appliance.
Steps for filling and preparing the water tank and softener.
Critical instructions for proper electrical connection and mandatory earthing.
Recommended procedure for initial water circulation before first use.
Steps for switching on the machine and its automatic water filling process.
Describes the heating process, warning lights, and pressure gauge monitoring.
Instructions for preparing coffee using ground coffee or pods.
Warnings regarding high temperatures and handling the filter holder.
How to use the knobs to dispense steam and hot water.
Alerts users about the pressurized nature of steam and water.
Routine cleaning of steam wand, filters, and drip tray.
Steps for performing an internal cleaning cycle using detergent.
Guidelines for cleaning external parts and soaking filters.
Explains water hardness, softener replacement, and regeneration.
Recommends water hardness levels and periodic cleaning.
Tips on coffee grinding, pod advantages, and preparation.
Instructions for achieving hot coffee, delicious cappuccino, and heating milk.
Declares conformity with Low Voltage and EMC Directives.
Lists harmonized standards applied for conformity assessment.
States compliance with RoHS directives and material regulations.
Covers regulations for food contact materials and specific UNI standards.
