Rigging And Raising The Mast
2. Ensure the halyards, shrouds and lowers shrouds
are led to the gooseneck/base of the mast and
res in the
the
4. Fit the spreaders.
ee page overleaf for fitment
diag
ip: Best practice is to fit the
evis pins from above to ensure all
5. Ensure that all the spreader pins and rings are taped up or serious
damage could occur to the sails.
1. Unwrap the mast.
each halyard rope end has a knot tied in it.
3. If applicable, fit
top “T” terminal
t e wi
positions on
rapez
mast. (Please note: The Laser 2000
Trapeze kit is optional and is not
supplied as standard)
(S
ram.)
(T
cl
split rings are positioned on the
underside of the spreader
bracket/bars.)
10
To Next Page
