RS 1319A - Introduction; Specifications; Electrical Specifications

1. INTRODUCTION
This instrument is a digital thermometer for use with any K-
type thermocouple as a temperature sensor.
Temperature indication follows the international temperature
scale of 1990. (ITS-90)
 Read the following information carefully before attempting to
operate or service the meter. When servicing, use only
specified replacement parts.
Environmental conditions:
c Altitude up to 2000 metres.
d Relatively humidity 80% max.
e Operating temperature: 0 to 40 °C
U.S. Pat. No. 446,135
Safety symbols:
Complies with EMC Directive 89/336/EEC
2. SPECIFICATIONS
2-1 Electrical specifications
Measurement Range: -50 to 1300 °C , -58 to 1999 °F
Resolution: 0.1°C, 1°C, 0.1°F, 1°F
Basic Accuracy: (@23 ± 5℃ Calibration)
Function Range
Accuracy
± (% of reading + degrees)
°C
°C
°C
°F
°F
°F
-50
°C to 0°C
0
°C to 1000°C
1000
°C to 1300°C
-58
°F to 0°F
0
°F to 1832°F
1832
°F to 1999°F
0.5% ± 1
°C
0.3% ± 1
°C
0.5% ± 1
°C
0.5% ± 2
°F
0.3% ± 2
°F
0.5% ± 2
°F
1