c LCD Display :
a). Main display : Temperature reading.
b). Secondary display : Temperature MAX, MIN, AVG
reading and offset reference value.
c). Memory display : 1 ~ 150 sets.
d). Auto power off mark (P).
d H HOLD key : Press H HOLD key to freeze or unfreeze
the display reading.
e
Power key : Press
key to turn the meter on or off.
f MX/MN key :
a). Press "MX/MN" key to cycle through the maximum,
minimum, and average readings.
b). Press "MX/MN" key for 2 seconds to exit MX/MN mode.
g ST Key : Press S or T key to increase or decrease the
READ mode memory location.
h MEM key : Press "MEM" key each time, stores one set of
logged
reading in memory.
i Ì key : Press Ì key to enter the offset (Relative) mode,
zero the displayed reading as a reference value. The
offset mode annunciator OFFSET is displayed, and the
reference value displayed on the secondary display.
Press Ì key again to exit the offset mode.
j ℃ / ℉ key : Press °C / °F key to select Celsius(°C) or
Fahrenheit (°F) temperature scale.
k READ key : Press "READ" key to show memory logged
reading, press again to exit this mode.
l Input : Thermocouple input.
4
To Next Page
Loading...