2.1 Both the Bank A and Bank B supply lines MUST be fused (fuse rating of 40Amps or less as the application requires).
2.2 If the primary sense input is used, the input MUST be fused (fuse rating of 20Amps or less as the application requires).
2.3 DO NOT obstruct fan vents along the top, side or under surfaces of the MCS32. Do not install any equipment on top
or underneath the MCS32.
The above installation requirement must be followed for safe operating and extended product lifetime.
RSG Engineering Limited Telephone : 01543 438800 Fax : 01543 438801 Email : sales@rsg-ontop.com Web : www.rsg-ontop.com
2:37
UNIVERSAL CONTROLLER PLUS (MCS-32) USER GUIDE V3 2 : INSTALLATION REQUIREMENTS
2 : Installation Requirements
To Next Page
Loading...