Rsrteng IPC-9800MOVTADHS Plus+

Need help?

Do you have a question about the Rsrteng IPC-9800MOVTADHS Plus+ and is the answer not in the manual?

Summary

Safety Information

Operation

Installing the Battery

Instrument Connection

IP Camera Connection

Steps to connect an IP camera, including PoE power considerations.

Analog Camera Connection

HD Coaxial Camera Connection

IPC Test Pro

Power Information

IP Discovery

Rapid ONVIF Test

ONVIF PTZ Control

Maintenance

Network Setting

PTZ

Set Preset Position

Moving the camera to a preset position and saving it.

Call the Preset Position

Recalling a previously saved preset position.

PTZ Speed Set

NON ONVIF

IPC Test Interface

Analog Camera Test

PTZ Controller Parameter Setting

A. Protocol

Selecting the appropriate PTZ protocol.

B. Port

Selecting the communication port for PTZ control.

C. Baud

Setting the baud rate for PTZ camera communication.

D. Address

Setting the address ID for PTZ camera control.

E. Pan Speed

F. Tilt Speed

G. Set Preset Position (Set PS)

H. Call the Preset Position (Go PS)

To Control PTZ by Key Buttons

RS485 Control

NET TOOL PRO

IP Address Scan

PING Test

Network Test (Ethernet Bandwidth Test)

DHCP Server

PoE Power; DC12 V 3 A and DC 5 V 2 A USB Power Output

Cable Test

RJ45 Cable TDR Test

Single Test

Advanced Test

Cable Tracer (*Optional)

TDR Cable Test (*Optional)

Curved Trajectory

Curve Result Analysis

Calibration

BNC Attenuation Test (*Optional)

PoE Voltage Test

Digital Multi-meter (*Optional)

OPERATING INSTRUCTION

DC Voltage Measuring

How to measure DC voltage using the multimeter.

AC Voltage Measuring

DC Current Measuring

AC Current Measuring

Resistance Measuring

Continuity Testing

Diode Testing

Capacitance Measuring

The Meter Protection

Voltage Protection

Resistance, Continuity, Diode, PTC component Protection

Optical Power Meter (*Optional)

Visual Fault Locator (*Optional)

Data Monitor

RTSP Player

Hik Test Tool

Modify Network Information

Modify User Information

Factory Reset Setting

Dahua Test Tool

Activation

Update

Update Online

System Update

System Setting

IP Setting

PTZ Address Scan

Restore the Factory Settings

PoE Power Output

PTZ Control

Digital Multi-meter *(Optional)

Optical Power Meter *(Optional)

Visual Fault Locator *(Optional)

TDR Cable Test *(Optional)

BNC Attenuation Test *(Optional)

Multi-meter Specifications

DC Voltage

AC Voltage

DC Current

AC Current

Resistance

Continuity

Diode

Capacitance

Optical Power Meter Specifications

Visual Fault Locator Specifications