RTR Energia PR-14 D - User Manual

PR
-
14 D
Operation manual
PRODUCT IMAGE
144 x 144 mm x 50 mm
SPECIFICATIONS
Display: Display liquid crystal backlit (4 digits)
Auxiliary power supply: 90 - 550V Ac Type connection voltage: 2-
phase, 2-wire (L2L3)
Input voltage range: 50 - 520V AC (L2-L3)
Range input current: 5A AC (minimum 50mA, Max 6A)
Load: 20mΩ frequency range: 45 - 65 Hz Consumption: 15VA
Max
Temperature indication: horn on display
Control range: cos fi: 0.800 (ind.) to - 0.800 (chapter)
Program switching: automatic
Alarm: over temperature E01: error in input TI
Environmental conditions: outdoor use
Operating temperature: 0 - 60 ° C
Storage temperature: - 20 - 60 ° C
Humidity: 0 - 95% mounting: Panel
ACCURACY
Measure Accuracy
COS FI ±0. 01
Temperature ±3 °
SAFETY PRECAUTIONS
All coding, symbols and safety instructions listed in this manual or on the equipment
must be followed strictly to ensure the safety of operating personnel and equipment.
If the equipment is handled in the manner specified by the manufacturer, the protection
of the crew could be affected.
Caution: Read the instructions for use prior to installation of the device.

Summary

Specifications

General Specifications

Accuracy

Measurement Accuracy

Safety Precautions

General Safety Instructions

Adherence to coding, symbols, and safety instructions for personnel and equipment safety.

Wiring Guide

Wiring Instructions

Installation Guide

Installation Procedures and Precautions

Instructions for recessed installation, ensuring terminals are inaccessible, and avoiding contact with internal circuits.

Installation and Dimensions

Front Panel

Keyboard Functions

Describes the functions of the controller's 4 keys for configuration, editing, saving, and mode changes.

Automatic Manual Mode

Data Screens

Wiring Diagram

Connection Diagram

Operating Modes Description

RTR Energia PR-14 D Specifications

General

Type	Programmable Relay
Input voltage	24V DC
Number of digital inputs	8
Number of digital outputs	6
Protection class	IP20
Analog outputs	0
Communication interface	RS-485
Operating temperature range	-20...+55 °C