Need help?Do you have a question about the RTS KP-3016 and is the answer not in the manual?
Covers bracket recommendations, OEI-2 warning, and step-by-step installation.
Details configuring keypanel connections using AZedit and IPedit software.
Explains general addressing, sources, and manual vs. automatic addressing.
Details usage of Frame, Ethernet connectors with LEDs, and Panel Mic connector.
Explains key colors and display icons for assignment types and system status.
Explains navigation using AUX/MENU and MAIN volume encoders and CLR button.
Explains how to adjust individual crosspoint gain for balanced audio levels.
Details how to control the main volume for speaker or headset outputs.
Explains how to adjust matrix input and OMNEO input volumes using the Aux Volume knob.
Describes how to set and use passwords to lock menu structures or service menus.
Step-by-step guide for downloading firmware to the keypanel using AZedit software.
Covers running bootloader, enabling new downloads, displaying FPGA, and upgrading FPGA.
Details splash screen image requirements and the upload process.
Provides instructions for downloading and installing custom font files to the keypanel.
Provides instructions for downloading panel icons or tally (key overlay) icons.
Details AGC settings for microphone active speed and sustainable level achievement.
Explains configuring bandpass, equalization, and notch filters for audio sources.
Describes routing audio signals to destinations like headset, speaker, or matrix.
Configures headset mic settings: auto-mute, mode, and type detection.
Configures headset speaker functions: auto-transfer and mode of operation.
Manages crosspoint listen gain: enabling, setting minimums, and resetting.
Covers assignment overview and Matrix assignments for trunked systems.
Explains how to assign auto functions like Auto Follow, Auto Listen to keys.
Configures OMNEO connections and channels for AUX inputs on the KP-3016.
Provides an overview of service menu options and Alpha settings.
Configures keypad backlight brightness, color, and activation behavior.
Details configuring keypad backlight brightness, color, and activation modes.
Sets how keypad backlights activate: on keypress, always on, or never.
Configures OMNEO device name, DHCP, and static IP settings for the keypanel.
Details entering IP address, gateway, netmask, and DNS server parameters.
Configures netmask address, domain name, and DNS server settings.
Sets the keypanel's poll ID for communication with AIO cards or intercoms.
Allows checking the operation of all keys and displays on the keypanel.
Describes storing and managing frequently dialed phone numbers via AZedit.
Details accessing the Auto Dials window and adding telephone numbers to the database.
Provides a summary of configurable audio settings including AGC, Filters, and Mixing.
Summarizes the configuration options for bandpass, equalization, and notch filters.
Summarizes OMNEO Offers menu and Save Config menu options.
Summarizes OMNEO device name, DHCP, and IP parameter configuration.
Guides on enabling Unicode operation by configuring keypanel and AZedit settings.
Provides instructions for mounting the power supply unit to a standard rack.
Provides instructions for mounting the power supply bracket and unit to the EKP-3016.
Covers bracket recommendations, OEI-2 warning, and step-by-step installation.
Details configuring keypanel connections using AZedit and IPedit software.
Explains general addressing, sources, and manual vs. automatic addressing.
Details usage of Frame, Ethernet connectors with LEDs, and Panel Mic connector.
Explains key colors and display icons for assignment types and system status.
Explains navigation using AUX/MENU and MAIN volume encoders and CLR button.
Explains how to adjust individual crosspoint gain for balanced audio levels.
Details how to control the main volume for speaker or headset outputs.
Explains how to adjust matrix input and OMNEO input volumes using the Aux Volume knob.
Describes how to set and use passwords to lock menu structures or service menus.
Step-by-step guide for downloading firmware to the keypanel using AZedit software.
Covers running bootloader, enabling new downloads, displaying FPGA, and upgrading FPGA.
Details splash screen image requirements and the upload process.
Provides instructions for downloading and installing custom font files to the keypanel.
Provides instructions for downloading panel icons or tally (key overlay) icons.
Details AGC settings for microphone active speed and sustainable level achievement.
Explains configuring bandpass, equalization, and notch filters for audio sources.
Describes routing audio signals to destinations like headset, speaker, or matrix.
Configures headset mic settings: auto-mute, mode, and type detection.
Configures headset speaker functions: auto-transfer and mode of operation.
Manages crosspoint listen gain: enabling, setting minimums, and resetting.
Covers assignment overview and Matrix assignments for trunked systems.
Explains how to assign auto functions like Auto Follow, Auto Listen to keys.
Configures OMNEO connections and channels for AUX inputs on the KP-3016.
Provides an overview of service menu options and Alpha settings.
Configures keypad backlight brightness, color, and activation behavior.
Details configuring keypad backlight brightness, color, and activation modes.
Sets how keypad backlights activate: on keypress, always on, or never.
Configures OMNEO device name, DHCP, and static IP settings for the keypanel.
Details entering IP address, gateway, netmask, and DNS server parameters.
Configures netmask address, domain name, and DNS server settings.
Sets the keypanel's poll ID for communication with AIO cards or intercoms.
Allows checking the operation of all keys and displays on the keypanel.
Describes storing and managing frequently dialed phone numbers via AZedit.
Details accessing the Auto Dials window and adding telephone numbers to the database.
Provides a summary of configurable audio settings including AGC, Filters, and Mixing.
Summarizes the configuration options for bandpass, equalization, and notch filters.
Summarizes OMNEO Offers menu and Save Config menu options.
Summarizes OMNEO device name, DHCP, and IP parameter configuration.
Guides on enabling Unicode operation by configuring keypanel and AZedit settings.
Provides instructions for mounting the power supply unit to a standard rack.
Provides instructions for mounting the power supply bracket and unit to the EKP-3016.
General| Brand | RTS |
|---|---|
| Model | KP-3016 |
| Category | Control Panel |
| Language | English |
To Next Page
