Need help?Do you have a question about the Rubi RUBIMIX-9 N and is the answer not in the manual?
General| Power | 1200 W |
|---|---|
| Mixing paddle diameter | 120 mm |
| Thread | M14 |
| Speed Settings | 2 |
| Material | Metal |
| Color | Red |
| Voltage | 230 V |
Check for damaged or broken parts after unpacking the machine.
Read and understand safety measures before operation for safe use.
Verify voltage/frequency match and coil cable during transport.
Machine is for stirring powder-type building materials and paints.
Keep work area clean and well-lit for optimum performance and safety.
Verify machine parts are not worn, damaged, or broken before starting.
Instructions for operating the machine's on/off switch.
How to adjust the speed using the mechanical regulator switch.
Adjusting speed by pressing the switch progressively for desired output.
Guide on inserting the mixer using FAST-IN or M14 tread connections.
Steps for replacing the mixer using FAST-IN or M14 tread connections.
Tips for maintaining the machine to prolong its useful life.
Store the unit in a dry place protected against freezing.
To Next Page