4
1.
Your Vehicle 6
1.1. Intended use 7
1.2. Vehicle overview 9
1.3. Delivery scope 10
1.4. Assembly of accessories 10
2. Commissioning 10
2.1. Handlebar alignment 11
2.2. Pedal assembly 11
2.3. Setting the saddle distance 12
2.4. Removal/Installation of the battery 13
2.5. Switching ON/OFF the drive 13
2.6. Adjusting support level 14
2.7. Switching ON/OFF the lamp 14
2.8. Initial engagement of brake discs 14
3. Before each ride 15
3.1. Check tires 15
3.2. Checking the brake system 15
3.3. Checking the chain 16
3.4. Battery: Checking the fixation and charging status 16
3.5. Checking the fork 16
3.6. Checking the screw connections 17
3.7. Checking the lights 17
4. Operating 18
4.1. NuVinci hub gear 18
4.2. Drive units 19
4.3.1. Belt Drive Units 19
4.3.2. Chain Drive Units 20
4.3. Brake system 20
4.4. Side stand 21
5. Ergonomic setting 21
5.1. Setting saddle position and inclination 21
5.2. Brake lever 22
5.2.1. Adjusting brake lever position 22
5.2.2. Brake grip angle 22
5.2.3. Adjusting brake lever distance 23
CONTENTS
To Next Page
