Ruger 77/50 - Page 41

41
Receiver J00110 All Models • Not Offered For Sale
Receiver Filler Screws, 2 Req’d, Not Illustrated C-83Black 77/50-RS, 77/50-RSO • ea. .50 –
Receiver Filler Screws, 2 Req’d, Not Illustrated C-83 K77/50-RSBBZ • ea. .50 –
Recoil Pad D06304 77/50-RS, K77/50-RSBBZ • 5.00 –
Recoil Pad Screw, 2 Req’d. D-84 77/50-RS, K77/50-RSBBZ • ea. .50 –
* Safety Selector J03800 77/50-RS, 77/50-RSO • 8.50 –
* Safety Selector KJ03800 K77/50-RSBBZ • – 9.00
Safety Selector Detent J04300 All Models • .50 –
Safety Selector Detent Spring D-32 All Models • .50 –
Safety Selector Retainer J02100 77/50-RS, 77/50-RSO • 1.50 –
Safety Selector Retainer KJ02100 K77/50-RSBBZ • – 2.00
Scope Ring Clamp D-74 All Models • 2.00 –
Scope Ring Nut D-73 All Models • 2.00 –
Scope Ring Screws, 8 Req’d. D-76 All Models • ea. .50 –
Scope Rings (Medium Rings) S-100RH All Models • 40.60 45.40
Accommodates a 42mm Lens
* Sear KJ02303 All Models • – 5.25
Sear Pivot Pin J04201 All Models • .50 –
Sling Swivel Adaptor, Front B08600 All Models • 3.00 –
Sling Swivel Rear Mounting Stud S-87 All Models • .75 –
Stock, Birch, Complete J20441 77/50-RS • 145.25 –
✝ Stock, Black Laminated, Complete J20442 K77/50-RSBBZ • –
______
✝ Stock, Walnut, Complete J20440 77/50-RSO •
______
–
Striker Cross Pin J04900 All Models • .50 –
Striker Head KJ01307 All Models • – 7.50
Striker Shaft KJ01308 All Models • – 1.25
Striker Spring J01205 All Models • .50 –
* Trigger KJ02000 All Models • – 10.50
Trigger Guard J00205 All Models • 40.00 –
Trigger Pivot Pin D-19 All Models • .50 –
Trigger/Sear Spring J02400 All Models • .50 –
* PARTS SO MARKED MUST BE FACTORY FITTED
✝ Contact the New Hampshire Service Dept. for current price. Be sure to have the complete serial number and model information before
calling (603) 863-3300.