BEFORE ACCEPTING DELIVERY FROM THE CARRIER
In accepting this shipment from Ruger Industries, Inc., the carrier has acknowledged receipt in good
condition and complete as shown on the packing list and/or Bill of Lading.
2
RECEIVING PROCEDURES
RECEIVING INSPECTION CHECK LIST
Check wheels and casters - they should turn freely and be free of dents,
cracks and flat spots.
Check main frame components, legs, forks, booms, handles and sheet
metal for dents, cracks and misalignment.
Check wiring to assure it is securely connected and in good condition.
Check main structure bolts, nuts and pin retainers for tightness.
After visual inspection, make operational test to assure unit is
functioning properly.
Is everything there? Check packing list to be sure optional equipment
is there. Make sure lifting chain is with crane. Be sure manual pump
handle is there.
Paint finish - scratches and scrapes to painted surfaces incurred
during shipment are accepted as necessary evil. Costs of protective
crating to protect paint are so high that it's better to accept a few
scrapes to the finish.
Check hoses, fittings and rams for hydraulic leaks.
Hydraulic leaks indicate loose or broken fittings, hoses etc. Hose
and tubing should be free of kinks and buckles.
Check chains and cables for breaks or obstructions.
Check
batteries for cracks, leaks. Check electrolyte level.
√√
√√
√
√√
√√
√
√√
√√
√
√√
√√
√
√√
√√
√
√√
√√
√
√√
√√
√
√√
√√
√
√√
√√
√
√√
√√
√
To Next Page
Loading...