Need help?Do you have a question about the RUGGED RANCH Nesting Box and is the answer not in the manual?
General| Brand | RUGGED RANCH |
|---|---|
| Model | Nesting Box |
| Category | Farm Equipment |
| Language | English |
Attach top panel (A) to side panel (D) using (3) screws (G). Front panel (A) and side panel (D) will be flush in the front.
Attach top panel (A) to side panel (D) using (3) screws (G). Ensure panels are flush on the side and in front.
Attach bottom panel (B) to both (D) panels using (6) screws (G), keeping flush with the front of the box.
Attach back panel (C) to side panels (D) and top/bottom panels (A/B) using screws (G).
Attach front panel (E) to side panels (D) and bottom panel (B) using (5) screws (G).
Insert center divider panel (E) into top panel (A) and bottom panel (B) using screws (G), ensuring flushness.
Attach Top Panel (A) and Bottom Panel (B) to both Side Panels (D) using screws (G).
Attach Back Panel (C) to both Side Panels (D) and Center Panel (E) using screws (G).
Attach Front Panel (F) to both Side Panels (D) and Center Panel (E) using screws (G).
Insert both middle dividers (E) into the bottom panel (B) and top panel (A) using screws (G).
Attach Top Panel (A) and Bottom Panel (B) to both Side Panels (D) using screws (G).
Attach Back Panel (C) to both Side Panels (D) and Center Panels (E) using screws (G).
Attach Front Panel (F) to both Side Panels (D) and Center Panels (E) using screws (G).
To Next Page