Need help?Do you have a question about the RuggON RUGGPAD PX-501 and is the answer not in the manual?
Steps to resolve issues when a 2D barcode scanner fails to scan properly.
Procedure for basic scanner configuration: reset, interface, and symbologies.
Step-by-step instructions for installing the WWAN module.
Steps to diagnose and resolve issues with the light sensor not working.
Procedure to access and navigate the BIOS CMOS setup menu.
Guide to re-flashing BIOS/EC using the system's Internal Shell environment.
Steps to update EC data by executing commands from a USB drive.
Procedure for recovering the operating system using a FAT32 formatted USB drive.
Configuring BIOS settings to enable legacy boot for OS recovery.
Resolving issues when the system cannot boot from a USB pen drive.
Adjusting BIOS features like CSM Support and Legacy Boot for USB booting.
Steps to resolve issues where there is no sound from audio input or output.
Steps to resolve issues where the external battery is not detected by the device.
Using configuration bar codes for initial setup of the barcode scanner.
Managing barcode symbologies by enabling or disabling them.
To Next Page
General