S2600E/P CLI Reference Guide Chapter 1 CLI Authorization Configuration Commands
<cr>
You can use the key word all to attribute all sub-commands
of reload to level-1 users:
Ruijie(config)# privilege exec all level 1 reload
After the above setting, you can access the CLI window as
level-1 user to use all sub commands of the reload
command:
Ruijie>reload ?
LINE Reason for reload
at reload at a specific time/date
cancel cancel pending reload scheme
in reload after a time inte
rval
<cr>
Command Description
Related
commands
enable secret
Set CLI-level password
1.3 show aliases
To display all the command aliases or aliases in special command modes, run
the show aliases command in the privileged EXEC mode.
show aliases [mode]
Parameter Description
Parameter
description
mode Mode of the command represented by
the alias.
Default
Settings
N/A.
Command
mode
EXEC mode.
Usage
guidelines
Show all the configuration of aliases if the command mode
has not been input.
Examples
Following example shows the command alias in the EXEC
mode:
Ruijie#show aliases exec
To Next Page
Loading...