S2600E/P CLI Reference Guide Chapter 1 CLI Authorization Configuration Commands
(0–15) of a command or
sub-commands
reset
Restore the command execution rights
to its default level
command-string: Command string to be authorized
Default
Settings
N/A.
Command
mode
Global configuration mode.
Usage
guidelines
The following table lists some key words that can be
authorized by command privilege in the CLI mode. The
number of command modes that can be authorized may
vary with different devices. In the global configuration
mode, you can use privilege ? to list all CLI command
modes that can be authorized.
Mode Descripton
config
Global configuration mode.
exec
Privileged EXEC mode
interface
Interface configuration mode
ip-dhcp-pool
DHCP address pool
configuration mode
keychain
KeyChain configuration mode
keychain-key
KeyChain-key configuration
mode
time-range
Time-Range configuration mode
Examples
Set the password of CLI level 1 as test and attribute the
reload rights to reset the device:
Ruijie(config)#enable secret level 1 0 test
Ruijie(config)#privilege exec level 1 reload
After the above setting, you can access the CLI window as
level-1 user to use the reload command
:
Ruijie>reload ?
LINE Reason for reload
To Next Page
Loading...