S2600E/P CLI Reference Guide Chapter 2 Switch Management Configuration
Commands
2 Switch Management
Configuration Commands
2.1 User Management
Related Commands
2.1.1 disable
To exit from privileged user mode to normal user mode or lower the privilege
level, execute the privileged user command
disable.
disable [ privilege-level ]
Parameter Description
Parameter
description
privilege-level Privilege level
Command
mode
Privileged mode.
Usage
guidelines
Use this command to return to user mode from privileged
mode. If a privilege level is added, the current privilege
level will be lowered to the specified level.
Note
The privilege level following the disable
command must be lower than the current
level.
Examples
The example below lowers the current privilege level of the
device down to level 10:
Ruijie# disable 10
Command Description
Related
commands
enable
From user mode enter to the
privileged mode or log on the
higher level of authority.
To Next Page
Loading...