S2600E/P CLI Reference Guide Chapter 2 Switch Management Configuration
Commands
2.1.2 enable
To enter into the privileged user mode, execute the normal user configuration
command enable.
For the details of the command, see the Security Configuration Command
Reference.
2.1.3 enable
password
To configure the password for different privilege level, execute the global
configuration command enable password. The no form of this command is
used to delete the password of the specified level.
enable password [level level] {password | [0|7] encrypted-password}
no enable password [level level]
Parameter Description
Password
Password for user to enter into the
EXEC configuration layer
Level
User's level.
0|7
Password encryption type, "0" for
no encryption, "7" for simple
encryption
Parameter
description
encrypted-password Password text.
Command
mode
Global configuration mode.
To Next Page
Loading...