Ruijie Networks RG-S2600E Series - Page 19

S2600E/P CLI Reference Guide Chapter 2 Switch Management Configuration
Commands
Keyword Description
Parameter
description
number
Port number of the HTTP server, the default
value is 80.
Default
configuration
80
Command
mode
Global configuration mode.
Usage
guidelines
This command is used to set the port of the HTTP service.
Use the no ip http port command to restore it to the
default setting.
Examples
The example below set the port of the HTTP service as
8080:
Ruijie(Config)# ip http port 8080
Command Description
Related
commands
enable service
Enable or disable the specified
service
2.1.9 ip http
source-port
This command is used to configure the port for HTTPS services in the global
configuration mode.
ip http source-port number
Parameter Description
Parameter
description
number
Configure the port for HTTPS services, and
the default value is 443.
Default
configuration
443
Command
mode
Global configuration mode.