S2600E/P CLI Reference Guide Chapter 2 Switch Management Configuration
Commands
Usage
guidelines
This command sets the logging banner message, which is
displayed upon login. All characters behind the
terminating symbol will be discarded by the system.
Examples
The following example shows the configuration of logging
banner:
Ruijie(config)# banner login $ enter your password $
2.2.2 banner motd
To set the Message-of-the-Day (MOTD), run the banner motd command in the
global configuration mode. To delete the MOTD setting, run the no banner
motd command.
banner motd c message c
Parameter Description
c
Separator of the MOTD. Delimiters are
not allowed in the MOTD.
Parameter
description
message Contents of an MOTD
Command
mode
Global configuration mode.
Usage
guidelines
This command sets the MOTD, which is displayed upon
login. The letters entered after the separator will be
discarded.
Examples
The following example shows the configuration of MOTD:
Ruijie(config)
Ruijie(config)# banner motd $ hello,world $
2.2.3 boot system
Use this command to set the startup main program filename for the device. The
no form of this command restores it to the default setting.
boot system url
no boot system
Parameter Description
Parameter
description
url Address used for booting files.
To Next Page
Loading...