S2600E/P CLI Reference Guide Chapter 2 Switch Management Configuration
Commands
Command Description
Related
commands
show boot
system
Show the boot related configuration of
the device.
2.2.4 clock set
To configure system clock manually, execute one of the two formats of the
privileged user command clock set:
clock set hh:mm:ss month day year
Parameter Description
hh:mm:ss
Current time, in the format of Hour
(24-hour): Minute: Second
day Date (1-31) of month
month Month (1-12) OF year
Parameter
description
year
Year (1993-2035), abbreviation is not
allowed.
Command
mode
Privileged mode.
Usage
guidelines
Use this command to set the system time to facilitate the
management.
For devices without hardware clock, the time set by the
clock set command takes effect for only the current
setting. Once the device powers off, the manually set time
becomes invalid.
Examples
The example below configures the current time as
10:20:30AM March 17
th
2003.
Ruijie# clock set 10:20:30 Mar 17 2003
Ruijie# show clock
clock: 2003-3-17 10:20:32
Command Description
Related
commands
show clock
Show current clock.
To Next Page
Loading...