S2600E/P CLI Reference Guide Chapter 2 Switch Management Configuration
Commands
2.2.5 clock
update-calen
dar
In the privileged EXEC mode, you can execute command clock
update-calendar to overwrite the value of hardware clock by software clock.
clock update-calendar
Parameter
description
N/A.
Command
mode
Privileged EXEC mode.
Usage
guidelines
Some platforms use hardware clock to complement
software clock. Since battery enables hardware clock to
run continuously, even though the device is closed or
restarts, hardware clock still runs.
If hardware clock and software clock are asynchronous,
then software clock is more accurate. Execute clock
update-calendar command to copy date and time of
software clock to hardware clock.
Examples
The example below copies the current time and date of
software clock to hardware clock:
Ruijie# clock update-calendar
Command Description
Related
commands
clock
read-calendar
Set the softwar clock with the hardware
clock value.
2.2.6 exec-timeout
To configure the connection timeout to this equipment in the LINE, use the
exec-timeout command.Once the connection timeout in the LINE is cancelled
by the no exec-timeout command, the connection will never be timeout.
exec-timeout minutes [seconds]
To Next Page
Loading...