S2600E/P CLI Reference Guide Chapter 2 Switch Management Configuration
Commands
Usage
guidelines
This hostname is mainly used to identify the device and is
taken as the username for the local device in the dialup
and CHAP authentication.
Examples
The example below configures the hostname of the device
as BeiJingAgenda:
Ruijie(config)# hostname BeiJingAgenda
BeiJingAgenda(config)#
2.2.8 prompt
To set the prompt command, run the prompt command in the global
configuration mode. To delete the prompt setting, run the no prompt command.
prompt string
Parameter Description
Parameter
description
string
Character string of the prompt
command. The maximum length is 32
letters.
Command
mode
Global configuration mode.
Usage
guidelines
If you have not set the prompt string, the prompt string is
the system name, which varies with the system name. The
prompt command is valid only in the EXEC mode.
Examples
Set the prompt string to rgnos:
Ruijie(config)# prompt rgnos
Ruijie(config)# end
rgnos
2.2.9 reload
To restart the device system, execute the privileged user command reload.
reload [ text | in [ hh: ] mm [ text ] | at hh:mm [month day year ] [ text ] | cancel ]
Parameter Description
text Cause to restart, 1-255 bytes
Parameter
description
in mmm hh:mm
The system is restarted after specified
time interval.
To Next Page
Loading...