S2600E/P CLI Reference Guide Chapter 2 Switch Management Configuration
Commands
at hh:mm
month day year
The system is restarted at the specified
time. Up to 200 days is supported
month
Month in the range January to
December
day Date in the range 1 to 31
year Year in the range 1993 to 2035
cancel
Cancel scheduled restart.
Command
mode
Privileged mode.
Usage
guidelines
This command is used to restart the device at specified
time, which may facilitate the management.
2.2.10 session-timeo
ut
To configure the session timeout for the remote terminal established in current
LINE, use the session-timeout command.When the session timeout for the
remote terminal in the LINE is cancelled, the session will never be timeout.
session-timeout minutes [output]
no session-timeout
Parameter Description
minutes The minutes of specified timeout.
Parameter
description
output
Regard data output as the input to
determine whether timeouts.
Default
configuration
The default timeout is 0 min.
Command
mode
LINE configuration mode.
Usage
guidelines
If there is no input/output information for the session to the
remote terminal established in current LINE within
specified time, this connection will be interrupted, and this
LINE will be restored to the free status.
To Next Page
Loading...