S2600E/P CLI Reference Guide Chapter 2 Switch Management Configuration
Commands
Parameter Description
memory
Write the system configuration
(running-config) into NVRAM, which is
equivalent to copy running-config
startup-config.
network
Save the system configuration into the
TFTP server, which is equivalent to
copy running-config tftp.
Parameter
description
terminal
Show the system configuration, which is
equivalent to show running-config.
Command
mode
Privileged mode.
Usage
guidelines
Despite of the alternative command, these commands
have been widely used and accepted, so they are
reserved to facilitate user's operation.
The no form with the command is equivalent to add the
memory operation.
Examples
The example below saves the device configuration:
Ruijie# write
Building configuration...
[OK]
Command Description
show
running-config
View the system configuration.
Related
commands
copy
Copy the device configuration files.
2.3 Showing Related
Commands
2.3.1 show mainfile
This command is used to show the current filename of the boot main program.
show mainfile
To Next Page
Loading...