Ruijie Reyee RG-EW1800GX PRO - Network Connection; Scenario 1: Configure a single router

Network Connection
Scenario 1: Configure a single router
After you connect the cable and power the router on, it will start up in 2 to 3 minutes. Wait until
t
he system status indicator turns into steady blue and the router broadcasts the SSID
(@Ruijie-sXXXX by default).
Please follow the steps:
① Connect to the SSID @Ruijie-sXXXX, and the configuration page will be displayed automatically; if
not, please visit 192.168.110.1.
configuration works, you can connect to the
SSID and access the Internet.
③
The router will check the Internet access
method. Please configure the network
parameters accordingly.
②
@Ruijie-sXXXX
xxxxx-xxxxxxxx
xxxxx-xxxxxxxx
xxxxx-xxxxxxxx
Wi-Fi
S/N:GXXXXXXXXXXXX
MAC:XXXX XXXX XXXX
MAC:XXXX XXXX XXXX
(XXXX refers to the last four digits of MAC on the back of router)
3
Configure the SSID and password. After the