EasyManua.ls Logo

Ruijie Reyee RG-NBR6210-E

Ruijie Reyee RG-NBR6210-E
155 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Cookbook Configuration
69
On the CLI, change the public IP address of the HQ router to a dynamic domain name.
branch(config)#no crypto isakmp key 0 ruijie address 192.168.2.1
branch(config)#crypto isakmp key 0 ruijie hostnameruijie.xicp.net
branch(config)#crypto map Gi0/6 20 ipsec-isakmp
branch(config-crypto-map)#no set peer 192.168.2.1
branch(config-crypto-map)#set peer ruijie.xicp.net
(2) Configure router A in the HQ.
a On the interface configuration page, click a WAN interface to configure it. Dynamic IP addresses can be
allocated in DHCP mode or obtained in dialup mode.

Table of Contents

Related product manuals