Ruijie RG-EG Series User Manual

Ruijie RG-EG Series Routers Hardware Installation and Reference Guide Product Overview
Interface
Interface
Description
WAN
1 WAN port, used to connect to the DSL/Cable modem for Internet access.
LAN
4 LAN ports, used to connect the computer to the switch. The LAN3 port can be
used as a WAN port via the Web configuration.
LED Indicator
LED Indicator
Description
SYS
Blinking green (0.5Hz): The device has started up, but is not connected to the
Ruijie Cloud.
Solid green: The device has started up, and is connected to the Ruijie Cloud.
Blinking green (10Hz): The device is starting up/shutting down.
Speed
Solid green: the port is connected at 10/100/1000 Mbps.
Off: the port is not connected at 10/100/1000 Mbps.
Button
Button
Description
Reset
Press reset button until the status LED blinks green at 10Hz to restore the
device to the factory default setting.
The default management IP address is http://192.168.110.1.
1.4 RG-EG210G-P
Specifications
Model
RG-EG210G-P
Storage
DDR3 SDRAM: 256MB
ROM: 16MB
Power Module
External 80W power adapter
Interface Standard
Ethernet: 10Base-T/100Base-TX/1000Base-TX
Dimension (without
rubber pads)
(W x H x D)
202 mm x 28 mm x 108 mm (7.95 in. x 1.1 in. x 4.25 in.)
Voltage
100V to 240V~, 50/60Hz, 1.5A max.
Power Consumption
Less than 80W (With PoE)
PoE
IEEE 802.3af/at, 70W max. output
Working
Temperature
0°C to 40°C (32°F to 104°F)

Ruijie RG-EG Series Specifications

General

Brand	Ruijie
Model	RG-EG Series
Category	Network Router
Language	English