Ruizu D08 - Charge the Player; Power On;Off; Date Transfer

3
1.Charge the Player
1. Plug the attached USB cable into the USB port of
a computer to charge the player. When you start
charging, it will show two options: “Charge &
Transfer” and “Charge & Play”. An indicate on the
top right will show the charging statue.
2. Use only the 5V/500mA charger for charging or it
may lead to product failure.
2.Power On/Off
Hold the Power button 3 seconds on the right to turn
on/off the player.
3.Date Transfer
Plug it into your computer and copy over media files
with the attached USB cable as if it were a flash
driver or use music management software such as
Windows Media Player to transfer the files.
Note: if your computer cannot detect the MP3 Player,
try to update your USB driver or use another cable.