Data transfer
You can transfer music from your computer to the player using the
drag-and-drop method or using music management software such as
Windows Media player.you can simply plug it into your computer and copy
over media files as if it were a hard drive.
Note: The player built-in without memory, so before you want to copy music to
the player,please make sure the Micro SD card is inserted.
Power On/Off
1. Power on: Hold the power button to turn on the music player
2. Power off: When the player on power on status, hold the power button to
turn off the music player
3. When the player on the power on status, click the power button to shut
down the screen, click the power button again to see the date and time display
on the screen, click the power button again to go to the main menu interface.
Charge the Player
1. By connecting to a computer with the included USB cable.The USB cable
can both be used for data transfer and charging the player
2. By connecting to a charger (Not included the package )
Please note:The specification of the charger must meet the following
requirements or any accident or failure happened will be regarded as
man-made damage.
Input: AC 110-240V 50/60Hz Max: 100mA
Output: DC 5.0-5.5V 500mA-800mA
To Next Page
Loading...
