Rukket HAACK NET PRO - Product Safety Warning; Safety Precautions and Guidelines; Assembly Steps; Base Assembly

HAACK NET PRO
ASSEMBLY INSTRUCTIONS
QUESTIONS? GIVE US A CALL! (1-855)-478-5538
V1
Prior to use
- Please use adult supervision and follow the instructions when setting up
and using the net.
- Regular use or abuse will eventually strain the netting and may break it.
- Do not stand behind the net.
- This net is not intended for personal protection.
- Inspect the netting and frame for damage or wear.
- Make sure the frame and net are assembled correctly and on a at surface, at least ten (10) feet from structures and
vehicles.
- The user should be positioned directly in front of the net.
- Failure to follow these precautions could result in serious injury or damage to property.
1. Assemble the base.
Note: The buttons and holes for the rear pieces are all on the top of
the pipes, while the buttons and holes for the legs are on the sides
facing inward.
2. Lay out the net so that the four sleeves are on top of the net and
the net’s black border is near the base frame. The “Rukket Sports”
and “Rukket.com” logos will be facing outward when your net is
fully assembled.
3. Assemble the berglass poles. 4. Run both berglass poles through the sleeves.
Product Safety Warning
rukket
sports
rukket
sports
rukket
sports
rukket
sports