GPS search in progress: Lights flash in turn
GPS search completed: center light steady on, right
light flashing
Copyright ©2024 Ruko All Rights Reserved.
20
R111 User Manual
Be sure to know the location of the drone's GPS
module well to avoid the RID module blocking the
drone's GPS, resulting in the drone not being able to
search for GPS signals properly.
Be sure to install the RID module firmly with the drone
and safely avoid the blades of the drone to avoid the
blades hitting the RID module.
The RID module needs to be installed in an
unobstructed place to avoid blocking the GPS signal
of the RID module, resulting in the inability to search
the GPS signal and broadcast data normally.
Attention:
To Next Page
Loading...