Rumble Tuff Easy Express 2 - Assemble Electric Pump Diaphragm Kit

14
Bottle Assembly
How to Assemble the Expression Collection Combo Kit
Hold the horn of the Breastshield Body
in one hand. Make sure the bottle-thread
side opening is facing up.
With your thumb and forenger, gently
smooth closed any openings on the tip
of the One-Way Valve and shape into a
straight line.
3
1
Note: The One-Way Valve tip does not have to align with anything, as long as all the
edges are securely sealed.
With the thumb and forenger of the
other hand, hold the tip of the One-Way
Valve and place the at circular bottom
into the opening. Be sure not to stretch,
bend, or twist the tip of the One-Way
valve. Seal all the edges of the at
circular bottom rmly.
2
Flat circular
bottom
Tip
Note: This is critical
to the performance
of the pump.
With the Cup in one hand, place
the Silicone Diaphragm in the Cup
(matching the shape of the Cup). Press
around the edges of the Diaphragm for
a secure t. Make sure the Diaphragm
is evenly mounted on the Cup and
there is no gap in between them.
4
How to Assemble the Electric Pump Diaphragm Kit