Rumble Tuff Easy Express 2 - Bottle Assembly

16
Bottle Assembly Bottle Assembly
How to Assemble the Expression Collection Combo Kit
Disconnect the tube from the
Tubing Splitter on the side
with the little Cap.
Ready to use as a single
pump.
Cap the opening of the
Tubing Splitter
2 31
To Convert Your Double Pump Into a Single Pump: Remove one tube and close the cap.
Note: Using the pump after converting from Single to Double or Double to Single may result in a temporary lack of
suction or over-suction respectively. Please use caution and adjust the pump to your comfortable and eective level.
To view the Assembly Guide video, please visit Rumble Tu online at
www.rumbletu.com/troubleshooting or scan this QR Code with your
smartphone or tablet.
Connect the Tubing to the Tubing
Connector located on the Cap.
7
Note: Make sure there is no moisture in the
Tubing.
Push rmly together for a tight seal.
The Expression Collection Combo Kit is
assembled.
8
9