1. With the O-Ring side down, put the Electric Pump Diaphragm Kit into the top of the Breastshield Body opening. Twist the Electric-
Pump Diaphragm Kit clockwise into the Breastshield Body until it locks into place.
2. Take the open-end of Vacuum Tubing (the end without the adapter) and connect to the Tubing Connector located on the Cap. Push
together rmly for a tight seal.
Note: Make sure there is no moisture in the Tubing.
How to Assemble the Expression Collection Combo Kit
Turn
Clockwise
English 12
Tubing
Connector
C1說明書-(75-PA20000-RT01)-20130104-A.indd 15 2013/3/4 下午 03:38:59
To Next Page
Loading...
