RunCam Micro Swift - User Manual

Connection
Transmitter
5D-OSD menu cable not included
Power in
GND
* Unplug the 5D-OSD menu cable after OSD setting.
5-36V in
GND
Video out
Dimensions & Installation
Model
Image Sensor
Horizontal Resolution
Lens
Signal System
S/N Ratio
Electronic Shutter Speed
Auto Gain Control (AGC)
Back Light Compensation (BLC)
Min. Illumination
WDR
DNR
Day/Night
Power
Net Weight
Dimensions
RunCam Micro Swift
1/3" SONY Super HAD II CCD
600TVL
2.1mm Lens(M8)
PAL/NTSC
>60dB (AGC OFF)
Yes
Yes
0.01Lux@1.2F
PAL: 1/50~100,000; NTSC: 1/60~100,000
D-WDR
2DNR
Color/Auto/B&W
DC 5-36V
5.6g
19mm*19mm*19mm
Parameters
RunCam Micro Swift
USER MANUAL
UP
DOWN
L R

Summary

Camera Connection and Setup

Connection Diagram

Illustrates the camera's connection ports for power input, ground, and video output.

Physical Dimensions

Details the camera's physical size (19mm cube) and mounting screw points.

Camera Menu Configuration

Main Menu Settings

Overview of the main menu structure including Setup, Exposure, Backlight, White Bal, Day & Night, Image Adj, DPC, Language, Reset, and Exit.

Exposure Settings

Configuration options for Shutter, Brightness, AGC, and DWDR.

Image Adjustment Settings

Controls for Lens Shad, Mirror, Font Color, Contrast, Sharpness, Negative Image, Gamma, Ped Level, and Color Gain.

Backlight Control (BLC;HLC)

Settings for Backlight Compensation (BLC) and Highlight Compensation (HLC) including area selection and level adjustments.

Day & Night Mode

Options for managing the camera's color, B&W, and auto modes, including sensitivity and delay settings.

RunCam Micro Swift Specifications

General

Resolution	600TVL
Integrated OSD	Yes
Auto Gain Control(AGC)	Yes
Power Supply	5V
Signal System	PAL/NTSC
Min. Illumination	0.01Lux
Current	120mA
Operating Temperature	-10°C
Electronic Shutter Speed	PAL:1/50~100, 000; NTSC:1/60~100, 000