RunCam Swift 2 - Page 5

OSD Menu
·
·
Press and hold the RIGHT button for 2
seconds to select the voltage
·
·
Press and hold the CENTER button for 2
seconds, the voltage starts to flash, now
you can adjust the voltage:
·
·
Increase(LEFT button) or reduce
(RIGHT button) 0.1V each press.
Maximum adjustment range: ± 1v
·
·
After adjustment, press the CENTER
button to select the voltage, then press
it again to save and exit.
16.8v RunCam
01:08
·
·
Voltage Calibration