There is a small remote can be fixed in the winches control box:
RWRC－05: While your fixing according to the drawings showing as follows:
We suggest operate your winch as follows:
1. Disengage the clutch of your winch.
2. Pull out the winch wire rope about 1.5 meters.
3. Reengage the clutch of your winch.
4. Insert the plug of remote control recever into the winches’ solenoid control box
female connector, if your wireless remote control is －03 type, you should properly
connect the black earth line to the battery negative.
5. Put your receiver at a certain place.
6. Keep the antenna of receiver out and straight.
7. Pull out the antenna of transmitter, and move down the cover of your transmitter,
bare out the control button.
8. Press the button, you can operate your winch start, stop, in and out.
Trouble Shooting:
SYMPTOM POSSIBLE CAUSE SUGGESTED ACTION
Motor turns,
but Winch
does not work,
Defective winch. Check the winch Operating instructions.
Receiver Loose connections
to the winch.
Reinsert all the way.
False Earth line cinnection Ensure the earth connections.
Motor does not
turn, but you
can hear “Click”
sound in the
receiver
Defective winch. Check the winch Operating instructions.
Receiver Loose connections
to the winch.
Reinsert all the way.
Motor runs in
one direction
only
Defective winch. Check the winch Operating instructions.
No actions
Receiver and transmitterdoes
not matching.
“01”Type : Code learn.
“02”Type : return to the manufacture to
rematch.
To Next Page
Loading...