Need help?Do you have a question about the Rupert Neve Designs 5057 ORBIT and is the answer not in the manual?
General| Type | Summing Mixer |
|---|---|
| Channels | 16 |
| Width | 19" (482.6 mm) |
| Outputs | 2 x XLR (Main), 2 x 1/4" TRS (Monitor) |
| Power Supply | External |
| Height | 1.75 inches |
| Frequency Response | 10Hz to 60kHz (+/- 0.1dB) |
| Noise | -92dBu (unweighted) |
Push-button switches for summing input signals to left/right mix buss outputs in pairs.
LEDs indicating signal presence (Green) and overload (Red) 2dB below clip point.
12-position rotary switch for precise attenuation level adjustment of the main output.
Illuminated push-button switch to toggle between OFF, RED, and BLUE transformer saturation modes.
31-detent potentiometer to control harmonic saturation when SILK is engaged.
Front-panel LED indicating power status (Green).
IEC 3-pin AC power inlet supporting 100-240VAC, 35 Watts max.
Slide switch to lift XLR Output Pin 1 from chassis ground, minimizing ground loops.
Transformer tapped output for driving transformer harder for more harmonic saturation.
TRS jacks for linking multiple 5057 units for channel expansion.
Female DB25 connector for eight balanced Class-A input channels.
Female DB25 connector for the second group of eight balanced Class-A input channels.
To Next Page