22
Ride
1. Press the power switch and turn on the vehicle power supply to con rm that the power is suffi cient.
2. Standing on one foot on deck, press the acceleration nger to let the scooter go, and put the other
foot on deck.
Wear your helmet and sheath before riding
to avoid falling and getting hurt.
3. Press the acceleration refers to the acceleration, upward release is deceleration, encounter
emergency need to brake, brake rear brake, rear brake front brake, or at the same time,
emergency brake, do not only brake the front brake.
4. When turning, please slow down and turn the handlebars slowly.
To Next Page
Loading...
