Rush MH 5 Profile - Control and Programming Features; Optics, Construction, and Installation; Connections and Electrical Data

40 RUSH MH 5 Profile User Manual
Pan ....................................................... 540°, coarse & fine control and speed
Tilt ......................................................... 270°, coarse & fine control and speed
Control and Programming
Control options ........................ DMX, stand-alone, synchronized master/slave
DMX channels ............................................................................................... 16
Stand-alone trigger options .................. Sound activation (music trig), auto trig
Stand-alone sequences ........................................... 4 pre-programmed shows
Stand-alone memory ........................................................................ 20 scenes
Music trig sensitivity ......................................................................... Adjustable
Setting and addressing ......................... Control panel with backlit LCD display
DMX compliance ............................................................ USITT DMX512/1990
Optics and Photometric Data
Light source .......................................................................... 75 W LED engine
Minimum LED lifetime ..................... 50 000 hours (to >70% luminous output)*
Rotating gobo size .................................................................. 24 mm (0.94 in.)
Rotating gobo image size ....................................................... 20 mm (0.79 in.)
*Figure obtained under manufacturer´s test conditions
Construction
Color ......................................................................................................... Black
Housing ......................................... High-impact flame-retardant thermoplastic
Protection rating ....................................................................................... IP 20
Installation
Mounting points ......................................... Quarter-turn bracket locking points
Location .................. Indoor use only, must be fastened to surface or structure
Orientation .................................................................................................. Any
Connections
AC power input .................................................................... Neutrik PowerCon
AC power throughput .......................................................... Neutrik PowerCon
DMX data in/out ........................................................ 3-pin & 5-pin locking XLR
Electrical
AC power ............................................................ 100-240 V nominal, 50/60 Hz
Power consumption ................................................................................ 157 W
Fuse ..................................................................................................... T 3.15 A
Power supply unit ................................... Auto-ranging electronic switch mode