Russell Hobbs CAFE BARISTA RHCM45 - ASSEMBLY AND CUP PLACEMENT; ATTACHING THE PORTA-FILTER TO THE BREW HEAD; PLACING THE CUP(S)

12
ATTACHING THE PORTA-FILTER TO THE BREW HEAD
a. Position the porta-filter underneath the brew head. Now attach the porta-filter by first moving
the retainer clip back into its original position.
b. Position the filter handle so that the handle lines up with the open lock icon “ ” on the unit
and so that it fits into the groove.
c. Now slowly turn the porta-filter to the right until the retention clip is aligned with the closed lock
symbol “ ” on the unit.
PLACING THE CUP(S)
a. Pull out the adjustable cup holder (located underneath the milk frothing container) if you are
using a small “demitasse” cup to brew espresso.
b. Keep the adjustable cup holder inside its storage compartment if you are using a larger cup to
brew cappuccino/ latte.